I had left the rabbit inlay to dry the previous workshop day so I got to take off the clamps and sand it down. After sanding it down, I saw that there were quite a few holes that were cheeky enough to escape the pressure so I had to fill them back up with […]
Read More...
Today was a relatively short day for me as I had a gig on in the evening that I had to scoot off to but in the short day I did have, I managed to get quite a lot done. I was continuing on the work of my bracings for the top. Most of the […]
Read More...
Day 9 was all about making the bracing, trimming off the excess lengths and chiseling out the check out points in the kerfing for the bracing to fit within the sides. As the back bracing was all ready and glued on, all I needed to do was trim off the excess lengths that were actually […]
Read More...
The sides were placed into the jig ready for me to plane down evenly so that the back can be put on. When we made the sides we left quite a bit of leeway in case of any measurement mishaps. This was Tor’s amazing inlay work. He is sanding down the fretboard to get the […]
Read More...
I didn’t really maximise my day as I had decision making issues haha. Took me forever to decide what I wanted so that I could then progress. Above was the rosettes I narrowed down to – I ended up asking you guys for a lot of help throughout the day and it was amazing. Everyone’s […]
Read More...
I had to skip a day at the workshop due to Teneriffe Festival, but Tor is zooming way beyond me. He’s doing something a little bit different though. Hancock Guitars offers two types of courses – making a guitar out of a kit so essentially learning how to put all the parts together and a […]
Read More...
I spent the day sanding. And I mean the whole day. It was important to first get both sides rid of glue and any non-stick paper that were left on from the gluing process and then to buff out any imperfections, rough edges or water marks. After that was completed it was time to get […]
Read More...
In the morning, Sean talked to us about soundboards and bracing. For each wood to really have the best tone, we need to look at the flexibility of the wood pieces to factor in the thickness of the bracing and support. Each wood has differences in stiffness across the grain and flexibility. For the wood […]
Read More...